Carriage Barn specifications

Specifications

All timbers used to manufacture our timber barns and carriage barns apart from OS board, are Tanalised C.C treated.

Framing: 2"x4" (50x100mm) prepared CLS framing set @ 18" (457mm) centres.

Wind Bracing: 2"x4" (50 x 100mm) prepared CLS 45 degree diagonal bracing.

Cladding:6" (150mm) shiplap cladding from selected timber.

Support Posts: 4"x4" (100x100mm) prepared and tanalised.

Front Lintel:2" x 9" (50x225mm).

Front Arched Bracing: Scalloped and dowelled arched bracing fitted to each open bay.

Roof timbers:(Purlins) 2"x5" (50x100mm) prepared CLS purlins set @ 18" (450mm) centres.

Roof Lining: 1/2" (12mm) Oriented strand board (OSB) roof lining.

Barn Roof: Black Onduline Roofing

Rainwater Protector: uPVC fitted behind the cladding which overhangs the course of bricks, preventing rainwater penetrating between the sole plate and brickwork.

Gutters: 4" (100mm) black half round gutters and down pipes fitted to front and rear.

Gable Ends: Gable ends are fitted with barge boards and points.

Bolting Down: 1/2" (12mm) Hilti plated steel para bolts fixing building to base (2 per 9' wall).

Height: 8'1 1/2" (2.48m) Eaves height when erected on a single course of holed engineering bricks. height to ridge 11'3" (3.43m).

Standard Sizes: 18'x18', 18'x27' and 18'x36'.

Optional Extras:Front with double doors, dividing wall, felt tiles, two bay (18'), three bay (27') and four bay (36').